@article{Ghourchian_Wyrzykowski_Lura_2017, title={A practical approach for reducing the risk of plastic shrinkage cracking of concrete}, volume={2}, url={https://letters.rilem.net/index.php/rilem/article/view/45}, DOI={10.21809/rilemtechlett.2017.45}, abstractNote={<p class="lmsabstract"><span lang="EN-GB">In this letter, a conventional method for mitigation of plastic shrinkage of fresh concrete based on comparing bleeding and evaporation rates (the former based on the commonly observed values of bleeding rate and the latter estimated by means of the commonly-used ACI nomograph) is critically assessed. It is shown that even if the initial bleeding rates are sufficiently high (i.e. higher than the evaporation rates), cracking may still occur if all the bleed water is lost by evaporation between the times of initial and final set, leading to the rise of capillary pressure. An alternative and more conservative method should be thus based on the total (accumulated) amount of bleed water compared to the total amount of evaporated water. The former should take into account the concrete’s properties and the geometry of the member, while the latter can be assumed based on the nomograph method.</span></p>}, journal={RILEM Technical Letters}, author={Ghourchian, Sadegh and Wyrzykowski, Mateusz and Lura, Pietro}, year={2017}, month={Dec.}, pages={40–44} }