TY - JOUR AU - Hubler, Mija AU - Al Wakeel, Shahlaa AU - Wang, Boning PY - 2020/08/12 Y2 - 2024/03/28 TI - Improving Concrete Toughness by Aggregate Arrangement JF - RILEM Technical Letters JA - RILEM Tech Lett VL - 5 IS - 0 SE - DO - 10.21809/rilemtechlett.2020.109 UR - https://letters.rilem.net/index.php/rilem/article/view/109 SP - 8-15 AB - <p>The focus of this research is to address the following open question: Can we engineer the distribution of coarse aggregate in concrete to improve crack growth resistance? A finite element study of aggregates distributed in a notched 3-point bending concrete sample shows that the stress field in front of the crack tip and in the entire concrete beam is carried differently when the aggregate is arranged in a more orderly manner. Based by this, the impact of coarse aggregate arrangement is confirmed experimentally. Fracture toughness is determined from notched 3-point bending samples prepared from the same mix with three types of casting approaches: One following ASTM C31, and two following the standardized casting method with raking and shear mixing to arrange particles in a more ordered manner. To evaluate the impact of these added casting steps to alter aggregate arrangement, X-ray computed tomography (XCT) data is collected of the particle positions for statistical analysis. XCT data shows that added raking and mixing during casting adjusts the arrangement of coarse aggregate with respect to each other in a systematic manner. The mechanical tests show increased toughness can be achieved when raking and shear mixing steps are added following the ASTM C31 casting process.</p> ER -